The best trolling motor for a bass boat may be wrong for a kayak or a saltwater fishing boat. Boat builders and marine distributors must also consider the battery behind each motor.
This guide profiles seven active trolling motor brands and explains where battery specifications change. SAFTEC makes custom trolling motor batteries for OEM and batch orders.
How We Selected the Brands
We selected brands with current trolling motor lines and published product information. The order reflects product breadth and different boat applications, not global sales or an independently tested performance ranking.
This guide covers electric trolling motors for low-speed boat control. Main-propulsion electric outboards are a separate category. MotorGuide is omitted because its official site says production under that brand has ceased, although owner support continues. Battery details are model-specific.

Top Trolling Motor Brands
Minn Kota
Minn Kota offers models from simple transom motors to GPS-equipped bow mounts. Ultrex QUEST combines foot steering with positioning features for bass boats. Riptide Instinct QUEST targets saltwater users and offers automatic stow and deploy.
Those QUEST products have 24V/36V options, but other Minn Kota motors differ. A boat builder should identify the exact freshwater or saltwater model before defining its battery bank, charger and installation space. Its broad range earns first place here.
Garmin
Garmin Force motors appeal to boat owners already using Garmin marine electronics. Force Kraken is designed for boats with higher freeboards and restricted bow space, with GPS control and internal cable routing.
Its installation instructions specify a 24V or 36V battery bank capable of supplying 60A continuously. That requirement shows why Ah alone is insufficient: BMS output, cables and charging must also match.
Lowrance
Lowrance Recon comes in freshwater and saltwater versions. Its brushless motor operates at 24V or 36V, while GPS anchoring and steering controls fit boats configured around Lowrance electronics.
For OEM planning, distinguish the intended Recon version and shaft length. Review battery space, cable routing and exposure; matching nominal voltage alone is insufficient.
Power-Pole
Power-Pole MOVE models, including ZR and PV, focus on precise boat control for fishing. The published range includes 24V/36V products and different shaft lengths for different hulls.
It suits bass and inshore boat comparisons. Battery capacity still depends on the chosen motor, expected time on the water and operating conditions. We cannot infer a measured runtime advantage from a product description.
Rhodan
Rhodan’s GPS-guided motors emphasize holding position while fishing. Its Gen5 line offers 24V and 36V lower-unit options and multiple shaft lengths.
For a custom battery project, the relevant question is how the motor behaves during repeated positioning as well as steady movement. Confirm current and charging specifications before fixing the pack design.
Newport
Newport serves kayaks, jon boats and small fishing craft with NV, Kayak, X and L lines. Its simpler transom-mounted options are relevant where a buyer does not require a premium GPS bow mount.
The NV line includes 12V and 24V versions depending on thrust. An OEM battery specification must name the motor model.
Watersnake
Watersnake offers both bow- and transom-mounted trolling motors. Its Prime Brushless transom range includes 12V and 24V options, while Stealth X publishes specific battery requirements for its 12V bow-mount models.
Some current models explicitly permit LiFePO4 batteries within stated voltage limits. Do not extend that approval across the entire brand.
What Changes the Battery Specification?
For boat builders and marine suppliers, compare motor model, required voltage, maximum current and intended operating time before discussing Ah. Then review usable energy, continuous BMS output, battery compartment, terminals, cables and charging profile. A 24V label alone does not prove that a lithium pack suits a 24V motor.
A trolling motor battery usually has a different job from the starting battery for a gasoline outboard. Keep their requirements separate unless the complete electrical arrangement has been evaluated. Our battery sizing guide explains voltage, capacity and fit; our marine battery page covers broader boat applications.
Discuss a Custom Trolling Motor Battery Project With SAFTEC
SAFTEC produces LiFePO4 packs in batches for motor brands, boat builders and marine distributors. We can develop an agreed configuration for voltage, capacity, BMS, enclosure, connectors, cables, labels and packaging. We are a battery manufacturer, not a retail motor shop or a repair service.
Start with your company, motor model or proposed electrical range, boat application, target market and approximate quantity. A drawing and charger information help if available; detailed interfaces are confirmed during development before sample approval. Contact SAFTEC about your project.
Frequently Asked Questions
Can one battery design serve several trolling motor models?
Possibly, if each model’s voltage, current, connection and charging requirements match the approved battery. Check compatibility model by model before using one pack across a range.
Can two 12V batteries always be wired in series for a 24V motor?
No. Series operation must be permitted by the specific battery design. Confirm the BMS, wiring and charging arrangement for the motor system before approving the pack.
What if our motor specification changes after sample approval?
Review the change against the approved drawing and battery specification. Updated documents, another sample or additional testing may be needed before production.
Which documents accompany an overseas battery order?
Available test reports and shipping documents depend on the final battery configuration and destination. State your documentation requirements during the project discussion so they can be confirmed for the order.
